PE vertical row of floor drain pipe fittings
Floor drain is an important interface to connect the sewer system and the interior surface of housing
as an important component in the drainage system, and its performance directly affects indoor air quality,
the bathroom is very important for odor control.
Floor drain should have four properties: fast drainage, anti-odor, anti-clogging free cleaning.
Floor drain, floor drain, as the name suggests is to drain, floor drain only a single function drain have
been behind the times.
Not only to drain the water fast, the most important thing is to anti-clogging, otherwise too old to clean
up, you no end of trouble up.
The main material to drain
There are cast iron, PVC, aluminum, stainless steel, brass, copper alloys and other materials.
1, cast iron: cheap, easy to rust, unsightly, rusty after hanging sticky dirt, easy to clean;
2, PVC: cheap, easily influenced by temperature deformation, poor scratch resistance and impact
3, cast: mid-range price, light weight, more rough;
4, stainless steel: affordable, beautiful and durable;
5, copper alloys: affordable, practical.
6, Brass: heavy, high-grade, high prices, surface can be plated.
***Drain - Maintenance
1.Drain pan flavor
Analysis: It may be high enough to drain the water seal, easy to dry, resulting in odor inside
the pan drains into the room.
Solution: First, do not necessarily have to drain the water back bend, plus a go to; Second, for
a same brand, same size floor drain. But construction, careful not to damage the waterproof layer.
In addition, to be reminded that, in use, it should be dry to prevent water seal, subject to regular
water. If long-term leave, preferably with the lid sealed to the floor drain.
Analysis: It may be to drain the cross section is not smooth, sewage can not be quickly passed, or
because of the internal structure of the floor drain punch, tangled up in the hair, fibers and the
like dirt and so on.
Solution: floor drain piping height is determined by the way the drainage system. Therefore, the choice
of ancillary drain height was less than 200mm and preferably less than 120mm, and must lateral drainage. Concealed common practice to local structural floor bathroom sink and toilet piping tube made of two
fabric cushion. In order to meet the requirements of the bathroom clear height and ergonomics, the
former sinking clearance of 300mm, height up to cushion the latter 170mm.
3.Drain water seepage
Workaround: open drain tiles around, surrounded by cement dug 3cm deep, then use the "plugging Ling"
seal about 1 hour closed water test done, to observe whether further seepage, if not seeped it shows restitution.
***Specifications of vertical row of Floor Drain Pipe Fittings
***Our products has CE certificate